VE6DOK Search
Start Here

All Project Sites Results

Emergency communications

Build an Emergency Radio Kit (Go-Kit)

When the power, phones and internet go down, a ham with a charged radio and a plan can still communicate. A go-kit is everything you need, packed and ready to grab in minutes, able to run for a day or more on its own power.

What a go-kit is for

  • Staying in touch with family and neighbours when cell networks are down or overloaded.
  • Helping a served agency, such as a shelter, hospital or municipal emergency centre, as part of an organized group like ARES.
  • Calling for help in a genuine emergency. When life is at immediate risk, you may use any means available to call for help.

The rule of thumb is grab and go in 10 minutes, and run for 24 to 72 hours.

Radios

  • A dual-band (2 m / 70 cm) handheld, plus a spare battery and an AA battery pack.
  • A dual-band mobile radio (25 to 50 watts) for more range, mounted in a box or on a small panel.
  • An HF radio (optional but valuable) for contacts beyond line-of-sight, such as across Alberta on 80 or 40 m.
  • Programmed channels: local repeaters, the national simplex calling frequencies (146.520 MHz on 2 m, 446.000 MHz on 70 cm), local net frequencies, and a weather radio channel if your radio receives it.
  • A printed copy of your channel list, in case you have to reprogram by hand.

Power

  • A lithium iron phosphate (LiFePO4) battery is light, safe and long-lived. 20 to 50 Ah runs a mobile radio on receive with occasional transmitting for a day or more.
  • Anderson Powerpole connectors are the standard for emergency groups, so your gear can share power with others.
  • Fuses on every power lead, as close to the battery as possible.
  • A way to recharge: a small solar panel with a controller, a vehicle charging lead, or a generator. Remember cold weather cuts battery capacity; keep batteries warm in winter.
  • Never run a generator indoors or in a garage. Carbon monoxide kills.

Antennas and cables

  • A roll-up J-pole (or slim jim) for 2 m: it packs into a pocket and beats a rubber-duck antenna by a wide margin when hung up high.
  • A magnetic-mount antenna for any vehicle roof.
  • Coax (a 7 to 15 m length) with the adapters you’ll need: BNC, SMA and SO-239/PL-259.
  • An HF wire antenna, such as an end-fed half-wave, with rope and a throw weight.
  • Electrical tape, zip ties and a small tool kit with a multimeter.

Paperwork and supplies

  • Message forms: ICS-213 general message forms, used by emergency services.
  • A log book and pencils. Pens freeze and skip in an Alberta winter.
  • Printed maps, a contact list and a copy of your amateur certificate.
  • Headphones or earbuds (shelters and command posts are noisy).
  • A headlamp with spare batteries.
  • Personal kit: water, snacks, medications, warm layers, a toque and gloves, and rain gear.

Keep it ready

  1. Test it monthly by checking into a net using only the go-kit and its battery.
  2. Charge batteries on a schedule, and rotate the snacks and water.
  3. Label every cable and keep a checklist in the lid.
  4. Practise setting up in the dark, and in the cold.
  5. Join a group. ARES (the Amateur Radio Emergency Service, run by Radio Amateurs of Canada) and local clubs train with emergency agencies. A trained team is worth far more than a well-stocked kit on its own.

Prepare your household too: see Preparedness at Lethbridge Weather, and keep a vehicle kit for winter roads.

Sources: Radio Amateurs of Canada (ARES); Government of Alberta emergency kit guidance; FEMA ICS-213 form. Last updated November 2026.

Was this page helpful?
📻 Friend of VE6DOK: hamshack.ca, Canada’s ham radio marketplace, club directory and QSL Academy licence courses by Don Rosberg, VE7DXE.
Get all four of our sites in one free email every Friday: Prairie Signals
Hello! “Getting ahead in business is like owning a 12-year-old car: the most important thing is push.”