VE6DOK Search
Start Here

All Project Sites Results

Getting started

Find an Elmer, or Become One

In ham radio, a mentor is called an Elmer. Almost every good operator had one: someone who answered the “dumb” questions, helped put up the first antenna and sat beside them for their first contact. Here’s how to find one in southern Alberta, and how to be one.

What’s an Elmer?

An Elmer is an experienced amateur who helps newcomers learn the hobby. The name is believed to have been popularized by a 1971 QST magazine column that mentioned a ham named Elmer who helped others get started. The idea is much older: hams have always passed the hobby along one person at a time.

An Elmer isn’t a teacher with a lesson plan. It’s a friend who knows the ropes.

What an Elmer can help with

  • Studying for the Basic exam, and understanding the answers rather than memorizing them.
  • Your first radio: choosing it, programming local repeaters, and setting the right offsets and tones.
  • Your first contacts: what to say, how to check into a net, and how to make a short, polite contact.
  • Antennas: what will fit your yard, how to put it up safely, and how to tune it.
  • Troubleshooting: high SWR, RF in the shack, noise, and the hundred small puzzles every station has.
  • Safety: power lines, towers, RF exposure and lightning. See Lightning protection.

How to find one in southern Alberta

  1. Join the local club. The Southern Alberta Amateur Radio Club in Lethbridge runs courses, has accredited examiners and is full of people happy to help.
  2. Check into a net. Weekly nets on local repeaters are friendly places to ask questions on the air. See Local repeaters.
  3. Go to Field Day in June, or join a Parks on the Air activation. Watching experienced operators work is the fastest way to learn.
  4. Ask your examiner. Whoever gives your exam usually knows who’s good at mentoring. Gary Wheeler, VE6CV, is an ISED Accredited Examiner in Lethbridge and can point you to the right people.
  5. Radio Amateurs of Canada has a list of clubs across the country.

Being a good student

  • Try it first, then ask. Bring notes: radio model, settings, what you’ve tried.
  • Respect their time; a coffee goes a long way.
  • Ask “why”, not just “how”. Understanding makes you a better operator.
  • Pass it on. The best thanks for an Elmer is helping the next newcomer.

Becoming an Elmer

  • Be patient. Everyone was new once, and some questions you’ll hear a hundred times.
  • Let them do it. Hand over the microphone. Their first contact should be theirs, not a demonstration.
  • Don’t overwhelm. One antenna, one band, one mode to start. The rest can wait.
  • Safety first, always: power lines, ladders, towers and RF exposure.
  • Welcome everyone, including young people, women and people with disabilities, who are under-represented on the air.
  • Youth: Scouts’ Jamboree On The Air (JOTA) each October is a great way to put a microphone in a young person’s hand for the first time.

Ready to start? See Getting your licence and Start here.

Sources: ARRL; Radio Amateurs of Canada; World Organization of the Scout Movement (JOTA). Last updated November 2026.

This site is built and looked after by Dok-Tor Harddrive Inc., Lethbridge IT services since 1990.

Was this page helpful?
Get all four of our sites in one free email every Friday: Prairie Signals
Hello! “Most people who berate their luck never think to question their judgment.”